Turnbuckle Assemblies

BROOKS Series Turnbuckle Assemblies are available in a variety of diameters, ends, and take-up ranges to satisfy a host of applications. Our turnbuckles are often used in combination with tension braces on H-Frame construction when MHC distances are critical. The assemblies, manufactured from forged carbon steel, are shipped factory assembled complete with jam nuts. Jaw bolts are furnished complete with the pin bolt, nut, and stainless steel cotter pin.



A. MHC
B. Jam Nut
C. Take-up Range

Rod Eye End Code "R"

Large Eye End Code "E"

Jaw End Code "J"

End Code Designation

"D"	"W"	"Y"
5/8"	7/8"	1 5/8"
3/4"	15/16"	1-13/16"
7/8"	1-1/8"	1-15/16"
1"	1-3/16"	2-3/8"

Table 1 - Diameter and Take-up Range

Code Number	Diameter Inches	Take-Up Inches	Ultimate Strength lb.	Approx. Wt. lb. Each
509	5/8	9	16,000	3.5
512	5/8	12	16,000	4.0
609	3/4	9	25,000	5.2
612	3/4	12	25,000	6.3
712	7/8	12	35,000	8.6
812	1	12	45,000	12.7

Ordering Codes

TB	XXX	-	X	X
Denotes Turnbuckle Series	Diameter and Take-Up Range (Table 1)		End Code Designation for One End (J, R, or E)	End Code Designation for Second End (J, R, or E)

Example

TB609-JR

• Turnbuckle Assembly
• 3/4" x 9"
• With One Jaw
• And One Rod Eye End