Dead End Assemblies

Complete Factory Assembled Units

BROOKS Dead End Assemblies are shipped to you complete with crossarms, braces, mounting bolts and washers ready for immediate field installation. There are no missing or lost parts to worry about.

Why Use a Factory Assembled Dead End?

Only one unit to order
Only one unit to inventory
Only one unit to install

Strength

Dead Ends are critical components of powerline systems, subjected to heavy longitudinal conductor tension loads much greater than the vertical loads. BROOKS Dead Ends are designed to handle these loads safely and efficiently. Most conventional Dead Ends, such as "buckarm" construction, orient the crossarms to carry heavy vertical loads. BROOKS Dead Ends position the arms to provide greater longitudinal strength with less wood.

Tested

Test results verify the greater strength of BROOKS Dead Ends vs. conventional Dead Ends.

Solid Sawn or Glued Laminated

BROOKS Dead End Assemblies are also manufactured from the industry accepted glued laminates. The laminates, produced from coast region Douglas fir, offer excellent strength characteristics and enhanced reliability. The cross sections are identical to those of solid sawn and therefore are completely interchangeable without hardware considerations. Laminates are proven to be cost effective and readily available. To gain the benefits of laminates of our Dead Ends, simply add the suffix "L" behind the catalog number when ordering. Example: 3103-D8L.

Reversible Braces

All BROOKS Dead Ends include BROOKS 446 Reversible Braces.

Static Proof Design

BROOKS Dead End fittings are designed for a tight static proof fit.

Adaptable

By drilling a hole in the center of the top arm of the BROOKS Dead End you can easily add jumper pins without reducing the strength of the unit.

Special Orders

BROOKS welcomes the opportunity to work with you on special dead end applications. Just send a sketch of your requirements to our Engineering Department and we will assist you in solving your special dead end needs.

	en español Home Products Company Contact Us Available Options: 3103 3-Wire Dead Ends 3203 3-Wire Dead Ends 3104 4-Wire Dead Ends 3204 4-Wire Dead Ends 3103 Guyed 3-Wire Dead Ends 3203 Guyed 3-Wire Dead Ends 3104 Guyed 4-Wire Dead Ends 3204 Guyed 4-Wire Dead Ends 3300 Series H-Frame Dead Ends 3400 Series Guy Attachment Packages In This Section: Quality Standards and Specifications Crossarms Dead End Assemblies Braces Ground Wire Moulding Extenda-Life Crossarms Product Categories: Distribution Crossarms Transmission Framing Hardware & Accessories Cross Reference Chart Dead End Assemblies Complete Factory Assembled Units BROOKS Dead End Assemblies are shipped to you complete with crossarms, braces, mounting bolts and washers ready for immediate field installation. There are no missing or lost parts to worry about. Why Use a Factory Assembled Dead End? Only one unit to order Only one unit to inventory Only one unit to install Strength Dead Ends are critical components of powerline systems, subjected to heavy longitudinal conductor tension loads much greater than the vertical loads. BROOKS Dead Ends are designed to handle these loads safely and efficiently. Most conventional Dead Ends, such as "buckarm" construction, orient the crossarms to carry heavy vertical loads. BROOKS Dead Ends position the arms to provide greater longitudinal strength with less wood. Tested Test results verify the greater strength of BROOKS Dead Ends vs. conventional Dead Ends. Solid Sawn or Glued Laminated BROOKS Dead End Assemblies are also manufactured from the industry accepted glued laminates. The laminates, produced from coast region Douglas fir, offer excellent strength characteristics and enhanced reliability. The cross sections are identical to those of solid sawn and therefore are completely interchangeable without hardware considerations. Laminates are proven to be cost effective and readily available. To gain the benefits of laminates of our Dead Ends, simply add the suffix "L" behind the catalog number when ordering. Example: 3103-D8L. Reversible Braces All BROOKS Dead Ends include BROOKS 446 Reversible Braces. Static Proof Design BROOKS Dead End fittings are designed for a tight static proof fit. Adaptable By drilling a hole in the center of the top arm of the BROOKS Dead End you can easily add jumper pins without reducing the strength of the unit. Special Orders BROOKS welcomes the opportunity to work with you on special dead end applications. Just send a sketch of your requirements to our Engineering Department and we will assist you in solving your special dead end needs.
	BROOKS Manufacturing Co. 2120 Pacific Street Bellingham, WA 98229 Phone: 360-733-1700 Fax: 360-734-6668 Home Products Company Contact Privacy Policy Site Map © Brooks Manufacturing Co. All Rights Reserved