Adjustable Spacer Fittings
BROOKS designs conform to accepted industry dimensions, so bracing connections and mounting hole alignments will interchange with existing system standards.
- 586 Adjustable Spacer Fitting
- 584 Adjustable Spacer Fitting
- 587 Adjustable Spacer Fitting
Spacer Fitting Brace Connection Bolts
Depending on the style of Spacer Fittings, either bent or straight bolts or double end studs may be required (as shown below). All bolts are shipped with nuts and locknuts factory assembled as illustrated.
7/8" Bent Bolts and Studs
For use with 586 and 587 Adjustable Spacer Fittings
7/8" Straight Bolts and Studs
For use with 584 Adjustable Spacer Fittings
Shoulder Eye Bolts and Saddle Assemblies
Eye Bolt and Saddle Assemblies are used to attach suspension insulators in single crossarm construction and are available for any crossarm size. The eye bolt is locked securely in place with a nut after threading through the tapped saddle which is made from 3/16" x 4" steel. Assemblies are furnished complete and may be ordered by indicating the appropriate information in the ordering code noted below. The eye bolt length will be a minimum of 1-1/4" longer than the indicated crossarm depth.
27400 Series U-Bolt and Chain Link Assemblies
The BROOKS 27400 Series U-Bolt and Chain Links are usually assembled on shield wire tie angles commonly used in H-frame construction. The assemblies are furnished standard with 4 hex nuts and 2 locknuts along with the appropriate forged chain link.
- 7751 Forged Chain Links
- 7754 Forged Chain Links
Swinging Angle Brackets
Swinging Angle Brackets are commonly used on line angle structures to maintain clearance between the crossarm and conductor during swing deflection of the insulator string. The swinging action also adds another degree of rotation, thereby eliminating problems associated with unequal tensions. Brackets are furnished complete with pin bolts and fasteners. The Spacer Fittings are not furnished as part of the assembly and must be ordered as separate items.
- 6200 Swinging Angle Brackets
- 6200U Swinging Angle Brackets
Dead End Tees
60253 Forged Dead End Tee
The BROOKS 60253 Series Forged Dead End Tees can be used to satisfy a multitude of applications in transmission framing, including dead ending conductor, down guying, or as a component in making a pinned connection for Tension Braces and X-Braces in H-Frame structures.
Ultimate Strength Rating: 60,000lbs
60254 Dead End Tee
The Combination Tee provides an inexpensive and strong unit for dual purpose dead ending and guying applications which are subjected to heavy tensions in transmission construction. The tees are furnished with 1-1/4" reamed connection holes for use with either C-Hooks or clevis attachment.
22714 Series 45 Degree Guy Plates
BROOKS 22714 Series Guy Plates offer flexibility to satisfy a number of applications for guying at 45 degrees. From the tables listed below, a combination of hole sizes and bolt spacing may be selected to meet individual requirements.
Guy Link Assembly
Guy Links and Yoke Plates are typically used in pairs for down guying and connected to Guy Plates, Dead End Tees, or Pole Bands. Components may be ordered individually or as complete assemblies as noted below. The catalog number represents each unit, not pairs. Other Links, Yoke Plates, and Guy Rollers are available.
- REA-TG-92: Type 1 - 27261
- REA-TG-92-2: Type 2 - 27262
Flat Gains and Reinforcing Plates for Wood Crossarms
- 6028 Crossarm Flat Gain
- 6029 Crossarm Ribbed Tie Plate
- 6030 Crossarm Embossed Reinforcing Plate
Pole Gain Plates for Wood Crossarms
21847 Series Pole Gain Plates
Bonding Bolts and Clips
22066 Bonding Bolt
BROOKS 22066, 1/2" x 1-1/2" Bonding Bolt Assembly is used to attach a ground wire to a steel surface where a 9/16" diameter clearance hole is available. This assembly, furnished complete as illustrated, is often used to bond ground wires to shield wire tie angles on H-Frame structures.
325281 Bonding Clips
The 325281 Series Bonding Clips are also used where it is desirable to secure a ground wire to a metal surface. The clips may be ordered individually or as an assembly complete with a 1-1/2" carriage bolt, nut, and locknut.
BC Bonding Clips
The BC Series Bonding Clips provide a simple and inexpensive method of attaching a ground wire to the threaded end of a bolt. The catalog number is for the clip only and the nuts and locknuts required to secure the installation should be ordered separately.
The assemblies, manufactured from forged carbon steel, are shipped factory assembled complete with jam nuts. Jaw bolts are furnished complete with the pin bolt, nut, and stainless steel cotter pin.
Brooks offers a wide variety of machine, hex, shoulder eye, and specialty bolts for the utility industry. Manufactured in accordance with ANSI C135.1 and galvanized in accordance with ASTM A153.
- Machine Bolts
- Double End Bolts
- Carriage Bolts
- Double Arming Bolts
- Double Arming Eye Bolts
- Oval Eye Bolts
- Washerhead Bolts
- Welded Shoulder Eye Bolts
- Square Nuts
- MF Locknuts
- Eye Nuts
Welded Washer Nuts
- Square Washers (Curved and Flat)
- Tapped Lip Washers
- Spring Washers
- Lock Washers